Bare Rosé Leaf Sprig nails
A fine Milk Bath stem with leaves pressed either side over Bare Rosé, and one Rosewood leaf breaking the run.
3 bottles: Bare Rosé, Milk Bath and Rosewood. Bare Rosé and Milk Bath are close in tone, so the design is tonal rather than graphic. It shows up in daylight and softens indoors. The bottles are not all the same finish (sheer and crème), so the pattern picks up light differently from the ground.
It sits on a round nail, filed to follow the fingertip, which is the shortest shape here and the one that chips least, so the motif gets a soft frame rather than a pointed one.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Bare Rosé Leaf Sprig nails
- 1 Buff, dehydrate and base coat, then cure. Three sheer coats of Bare Rosé — it is translucent, so it builds rather than covers.
- 2 Draw a fine Milk Bath stem, press leaves off it either side, then add one Rosewood leaf.
- 3 Gloss top coat, cure, then cuticle oil once it is out of the lamp.
Questions about Bare Rosé Leaf Sprig
Is Bare Rosé Leaf Sprig hard to do at home?
Yes, with a steady hand. The motif is freehand, so the first nail is usually the worst one. Budget around 45 minutes for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Bare Rosé Leaf Sprig?
3 bottles: Bare Rosé (sheer), Milk Bath (sheer) and Rosewood (crème). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Bare Rosé Leaf Sprig work on short nails?
Round is already the shortest shape here, so yes, this is one of the designs that works at almost any length.
How many coats does Bare Rosé Leaf Sprig need?
More than you would expect. Bare Rosé and Milk Bath are translucent, so the colour builds over three thin coats rather than covering in two. Stop wherever you like the depth — that is the point of a sheer.