Cherry Red 3D Bubbles nails
3D bubbles: clear domes built over Cherry Red, each one catching its own highlight.
3 bottles: Cherry Red, Milk Glass and Oxblood. Cherry Red and Milk Glass sit a comfortable distance apart: the motif is clearly legible without shouting, which is the easiest range to freehand in. The bottles are not all the same finish (crème and sheer), so the pattern picks up light differently from the ground.
On a squoval the design has real width to work across, and the rounded corners are what stop the straight walls catching on things.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Cherry Red 3D Bubbles nails
- 1 Buff, dehydrate and base coat, then cure. Two thin coats of Cherry Red, curing each one.
- 2 Place builder-gel domes on cured Cherry Red and flash-cure each so it holds its shape.
- 3 Seal around each piece with gel glue and cure, checking nothing has a lifted edge.
Questions about Cherry Red 3D Bubbles
Is Cherry Red 3D Bubbles hard to do at home?
It is the hardest tier on the site. It is doable at home, but the technique is the point rather than the colour. Budget an hour or more for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Cherry Red 3D Bubbles?
3 bottles: Cherry Red (crème), Milk Glass (sheer) and Oxblood (crème). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Cherry Red 3D Bubbles work on short nails?
A squoval works short: you lose canvas width rather than length, so the motif just sits closer together.
How many coats does Cherry Red 3D Bubbles need?
More than you would expect. Milk Glass is translucent, so the colour builds over three thin coats rather than covering in two. Stop wherever you like the depth — that is the point of a sheer.