Cherry Red ruled with thin vertical Milk Glass lines, evenly spaced.
3 bottles: Cherry Red, Milk Glass and Oxblood. Cherry Red and Milk Glass sit a comfortable distance apart: the motif is clearly legible without shouting, which is the easiest range to freehand in. The bottles are not all the same finish (crème and sheer), so the pattern picks up light differently from the ground.
On an oval the design is not stretched or compressed anywhere, which makes it the most neutral setting of the lot.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Cherry Red Pinstripe nails
- 1 Buff, dehydrate and base coat, then cure. Two thin coats of Cherry Red, curing each one.
- 2 Rule each Milk Glass stripe cuticle to tip in one pass with a long striping brush.
- 3 Gloss top coat, cure, then cuticle oil once it is out of the lamp.
Questions about Cherry Red Pinstripe
Is Cherry Red Pinstripe hard to do at home?
Yes, with a steady hand. The motif is freehand, so the first nail is usually the worst one. Budget around 45 minutes for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Cherry Red Pinstripe?
3 bottles: Cherry Red (crème), Milk Glass (sheer) and Oxblood (crème). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Cherry Red Pinstripe work on short nails?
Oval is one of the better shapes for a short nail: it lengthens the look of the bed without needing free edge to do it, so the design carries over unchanged.
How many coats does Cherry Red Pinstripe need?
More than you would expect. Milk Glass is translucent, so the colour builds over three thin coats rather than covering in two. Stop wherever you like the depth — that is the point of a sheer.