A pierced nail: a drilled hole near the free edge with a hoop through it, over Chilli Lacquer.
3 bottles: Chilli Lacquer, Milk Bath and Brick. Chilli Lacquer and Milk Bath sit a comfortable distance apart: the motif is clearly legible without shouting, which is the easiest range to freehand in. The bottles are not all the same finish (crème and sheer), so the pattern picks up light differently from the ground.
It sits on a coffin, sometimes called ballerina, tapered at the sides and cut off square at the tip. It needs real length and repays it with the largest flat area of any shape.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Chilli Lacquer Piercing nails
- 1 Buff, dehydrate and base coat, then cure. Two thin coats of Chilli Lacquer, curing each one.
- 2 Drill the hole through the cured free edge with a hand file bit, then fit the ring.
- 3 Seal the drilled edge with a brush of top coat so the layers cannot lift around it.
Questions about Chilli Lacquer Piercing
Is Chilli Lacquer Piercing hard to do at home?
It is the hardest tier on the site. It is doable at home, but the technique is the point rather than the colour. Budget an hour or more for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Chilli Lacquer Piercing?
3 bottles: Chilli Lacquer (crème), Milk Bath (sheer) and Brick (crème). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Chilli Lacquer Piercing work on short nails?
Coffin is the one shape here that genuinely needs length. On a short nail there is not enough free edge to cut square, and it will read as a squoval instead.
How many coats does Chilli Lacquer Piercing need?
More than you would expect. Milk Bath is translucent, so the colour builds over three thin coats rather than covering in two. Stop wherever you like the depth — that is the point of a sheer.