Electric Blue 3D Bubbles nails
Electric Blue under a scatter of raised clear beads — texture you can feel, not a printed dot.
3 bottles: Electric Blue, Milky Cobalt and Petrol Blue. Electric Blue and Milky Cobalt sit a comfortable distance apart: the motif is clearly legible without shouting, which is the easiest range to freehand in. The bottles are not all the same finish (crème and sheer), so the pattern picks up light differently from the ground.
The oval shape is the soft one: no corners, no point, and a canvas that stays about the same width from cuticle to tip.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Electric Blue 3D Bubbles nails
- 1 Buff, dehydrate and base coat, then cure. Two thin coats of Electric Blue, curing each one.
- 2 Place builder-gel domes on cured Electric Blue and flash-cure each so it holds its shape.
- 3 Seal around each piece with gel glue and cure, checking nothing has a lifted edge.
Questions about Electric Blue 3D Bubbles
Is Electric Blue 3D Bubbles hard to do at home?
It is the hardest tier on the site. It is doable at home, but the technique is the point rather than the colour. Budget an hour or more for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Electric Blue 3D Bubbles?
3 bottles: Electric Blue (crème), Milky Cobalt (sheer) and Petrol Blue (crème). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Electric Blue 3D Bubbles work on short nails?
Oval is one of the better shapes for a short nail: it lengthens the look of the bed without needing free edge to do it, so the design carries over unchanged.
How many coats does Electric Blue 3D Bubbles need?
More than you would expect. Milky Cobalt is translucent, so the colour builds over three thin coats rather than covering in two. Stop wherever you like the depth — that is the point of a sheer.