Electric Blue with irregular Milky Cobalt patches — the more lopsided they are, the more it reads as print.
3 bottles: Electric Blue, Milky Cobalt and Petrol Blue. Electric Blue and Milky Cobalt sit a comfortable distance apart: the motif is clearly legible without shouting, which is the easiest range to freehand in. The bottles are not all the same finish (crème and sheer), so the pattern picks up light differently from the ground.
On a coffin shape there is more flat nail than almost anywhere else on the site, so a dense or textured finish has room to be seen.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Electric Blue Cow Print nails
- 1 Buff, dehydrate and base coat, then cure. Two thin coats of Electric Blue, curing each one.
- 2 Drop uneven Milky Cobalt blobs over cured Electric Blue, then add two small dots to fill the gaps.
- 3 Gloss top coat, cure, then cuticle oil once it is out of the lamp.
Questions about Electric Blue Cow Print
Is Electric Blue Cow Print hard to do at home?
Yes, with a steady hand. The motif is freehand, so the first nail is usually the worst one. Budget around 45 minutes for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Electric Blue Cow Print?
3 bottles: Electric Blue (crème), Milky Cobalt (sheer) and Petrol Blue (crème). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Electric Blue Cow Print work on short nails?
Coffin is the one shape here that genuinely needs length. On a short nail there is not enough free edge to cut square, and it will read as a squoval instead.
How many coats does Electric Blue Cow Print need?
More than you would expect. Milky Cobalt is translucent, so the colour builds over three thin coats rather than covering in two. Stop wherever you like the depth — that is the point of a sheer.