Espresso with hardware rather than paint — one piercing set at the tip.
3 bottles: Espresso, Bare Rosé and Bitter Chocolate. Espresso against Bare Rosé is a hard contrast, so the motif reads from across a room, and any wobble in the line reads with it. The bottles are not all the same finish (crème and sheer), so the pattern picks up light differently from the ground.
It sits on a squoval, meaning square walls with the corners filed off, which gives the flattest and widest canvas here and the least distortion at the edges.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Espresso Piercing nails
- 1 Buff, dehydrate and base coat, then cure. Two coats of Espresso. A dark base shows every ridge, so the ridge-filling base coat matters more than usual here.
- 2 Drill the hole through the cured free edge with a hand file bit, then fit the ring.
- 3 Seal the drilled edge with a brush of top coat so the layers cannot lift around it.
Questions about Espresso Piercing
Is Espresso Piercing hard to do at home?
It is the hardest tier on the site. It is doable at home, but the technique is the point rather than the colour. Budget an hour or more for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Espresso Piercing?
3 bottles: Espresso (crème), Bare Rosé (sheer) and Bitter Chocolate (crème). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Espresso Piercing work on short nails?
A squoval works short: you lose canvas width rather than length, so the motif just sits closer together.
How many coats does Espresso Piercing need?
More than you would expect. Bare Rosé is translucent, so the colour builds over three thin coats rather than covering in two. Stop wherever you like the depth — that is the point of a sheer.