Lilac Haze Ribbed Glass nails
Lilac Haze under fine Milky Cobalt ribbing, so the nail reads as fluted rather than printed.
3 bottles: Lilac Haze, Milky Cobalt and Deep Iris. Lilac Haze and Milky Cobalt are close in tone, so the design is tonal rather than graphic. It shows up in daylight and softens indoors. The bottles are not all the same finish (crème and sheer), so the pattern picks up light differently from the ground.
Coffin nails give the most surface of any shape here, which is why the heavier finishes tend to live on them; they also need the most length to work at all.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Lilac Haze Ribbed Glass nails
- 1 Buff, dehydrate and base coat, then cure. Two thin coats of Lilac Haze, curing each one.
- 2 Pipe evenly spaced Milky Cobalt ridges over cured Lilac Haze with a thick builder gel, curing each pass.
- 3 One thick gloss coat between the ridges — not over them, or the fluting flattens out.
Questions about Lilac Haze Ribbed Glass
Is Lilac Haze Ribbed Glass hard to do at home?
It is the hardest tier on the site. It is doable at home, but the technique is the point rather than the colour. Budget an hour or more for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Lilac Haze Ribbed Glass?
3 bottles: Lilac Haze (crème), Milky Cobalt (sheer) and Deep Iris (crème). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Lilac Haze Ribbed Glass work on short nails?
Coffin is the one shape here that genuinely needs length. On a short nail there is not enough free edge to cut square, and it will read as a squoval instead.
How many coats does Lilac Haze Ribbed Glass need?
More than you would expect. Milky Cobalt is translucent, so the colour builds over three thin coats rather than covering in two. Stop wherever you like the depth — that is the point of a sheer.