Milk Glass Brushstroke nails
A single loaded brushstroke of Snow White dragged across Milk Glass, ends left dry and broken.
3 bottles: Milk Glass, Snow White and Shell Beige. Milk Glass and Snow White are close in tone, so the design is tonal rather than graphic. It shows up in daylight and softens indoors. The bottles are not all the same finish (sheer and crème), so the pattern picks up light differently from the ground.
Coffin nails give the most surface of any shape here, which is why the heavier finishes tend to live on them; they also need the most length to work at all.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Milk Glass Brushstroke nails
- 1 Buff, dehydrate and base coat, then cure. Three sheer coats of Milk Glass — it is translucent, so it builds rather than covers.
- 2 One loaded pass of Snow White across cured Milk Glass, lifting at the end so the stroke breaks up.
- 3 Gloss top coat, cure, then cuticle oil once it is out of the lamp.
Questions about Milk Glass Brushstroke
Is Milk Glass Brushstroke hard to do at home?
Yes, with a steady hand. The motif is freehand, so the first nail is usually the worst one. Budget around 45 minutes for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Milk Glass Brushstroke?
3 bottles: Milk Glass (sheer), Snow White (crème) and Shell Beige (crème). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Milk Glass Brushstroke work on short nails?
Coffin is the one shape here that genuinely needs length. On a short nail there is not enough free edge to cut square, and it will read as a squoval instead.
How many coats does Milk Glass Brushstroke need?
More than you would expect. Milk Glass is translucent, so the colour builds over three thin coats rather than covering in two. Stop wherever you like the depth — that is the point of a sheer.