Ochre Sun with a soft Milky Ochre halo through the middle, edges melted rather than drawn.
3 bottles: Ochre Sun, Milky Ochre and Bronze. Ochre Sun and Milky Ochre are close in tone, so the design is tonal rather than graphic. It shows up in daylight and softens indoors. The bottles are not all the same finish (crème, sheer and shimmer), so the pattern picks up light differently from the ground.
It sits on a squoval, meaning square walls with the corners filed off, which gives the flattest and widest canvas here and the least distortion at the edges.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Ochre Gold Aura nails
- 1 Buff, dehydrate and base coat, then cure. Two thin coats of Ochre Sun, curing each one.
- 2 Sponge or airbrush Milky Ochre into the centre of Ochre Sun and blend outward until the edge disappears.
- 3 Gloss top coat, cure, then cuticle oil once it is out of the lamp.
Questions about Ochre Gold Aura
Is Ochre Gold Aura hard to do at home?
Yes, with a steady hand. The motif is freehand, so the first nail is usually the worst one. Budget around 45 minutes for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Ochre Gold Aura?
3 bottles: Ochre Sun (crème), Milky Ochre (sheer) and Bronze (shimmer). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Ochre Gold Aura work on short nails?
A squoval works short: you lose canvas width rather than length, so the motif just sits closer together.
Do I need a UV lamp for Ochre Gold Aura?
Yes. Bronze only works as a gel — the effect depends on rubbing or setting the finish into a cured tacky layer, which air-dry polish never gives you.