A ruled grid in Milky Cobalt over Powder Sky — lines only, nothing filled.
3 bottles: Powder Sky, Milky Cobalt and Denim. Powder Sky and Milky Cobalt are close in tone, so the design is tonal rather than graphic. It shows up in daylight and softens indoors. The bottles are not all the same finish (sheer and crème), so the pattern picks up light differently from the ground.
The squoval shape means straight sidewalls and a soft tip: anything built on a grid or a straight line sits truest here.
Make it yours
Bottles for this nail
Tap a bottle to open it on the shelfWhat you need
How to paint Powder Blue Grid nails
- 1 Buff, dehydrate and base coat, then cure. Three sheer coats of Powder Sky — it is translucent, so it builds rather than covers.
- 2 Rule the Milky Cobalt lines one direction, cure, then rule the crossing lines.
- 3 Gloss top coat, cure, then cuticle oil once it is out of the lamp.
Questions about Powder Blue Grid
Is Powder Blue Grid hard to do at home?
Yes, with a steady hand. The motif is freehand, so the first nail is usually the worst one. Budget around 45 minutes for a full set, and three colours means three chances for something to bleed, so cure between each one rather than working wet on wet.
What polish do I need for Powder Blue Grid?
3 bottles: Powder Sky (sheer), Milky Cobalt (sheer) and Denim (crème). Plus a base coat and a gloss top coat, which every design here assumes you already have.
Does Powder Blue Grid work on short nails?
A squoval works short: you lose canvas width rather than length, so the motif just sits closer together.
How many coats does Powder Blue Grid need?
More than you would expect. Powder Sky and Milky Cobalt are translucent, so the colour builds over three thin coats rather than covering in two. Stop wherever you like the depth — that is the point of a sheer.